|
Construction
laborers perform a wide range of physically
demanding tasks involving building and
highway construction, tunnel and shaft
excavation, hazardous waste removal,
environmental remediation, and demolition.

As construction work becomes more dependent
on the use of complex equipment and
machinery and a broader selection of
materials and techniques the construction
craft laborer is increasingly expected to
have enhanced competencies in using,
managing, and understanding
resources, information, and technology. They
also need to have basic communication,
comprehension, and interpersonal skills.
A Construction Craft Laborer takes pride in
the fact that they have a hand in every
structure built in this country - below
ground as well as above. They are one of the
first crafts on the job and the last craft
to leave the job. |
The
Construction Craft Laborer Apprenticeship
program consists of 4,000 hours
of on the job
experience and a minimum of 320 hours off
the job related training before being
promoted to Journeyperson. Wages begin
between 60% and 80% of Journeyperson scale
and may increase between 5% and 10% each
1000 hours of work completed if all of
the program requirements are met.

Training for apprentices registered with a
Local union hall is free as is free room and
board while attending courses.
To register for an apprenticeship program
contact a local union hall or training
center in your area. Please see
Regional Map
for contacts and phone numbers of the
locations near you. Check out the
Training link for more information on
training facilities within the Northwest
Region.
|
|
Construction
laborers need good manual dexterity,
hand-eye coordination, and balance. They
also need the ability to read and comprehend
all warning signs and labels on a
construction site and reading skills
sufficient to understand and interpret
plans, drawings, and written instructions
and specifications. They should be capable
of working as a member of a team and have
basic problem-solving and math skills.
Employers want workers who are hard-working,
reliable, and diligent about being on time.
Additionally, construction laborers who wish
to work in environmental remediation must
pass a physical test that measures the
ability to wear protective equipment such as
respirators. Computer skills also are
important as construction becomes
increasingly mechanized and computerized.
Construction
laborers clean and prepare construction
sites to eliminate possible hazards, dig
trenches, mix and place concrete, and set
braces to support the sides of excavations.
They load, unload, identify, and distribute
building materials to the appropriate
location according to project plans and
specifications on building construction
projects. They also tend machines; for
example, they may mix concrete using a
portable mixer or tend a machine that pumps
concrete, grout, cement, sand, plaster, or
stucco through a spray gun for application
to ceilings and walls. Construction laborers
often help other craft workers, including
carpenters, plasterers, operating engineers,
and masons.
At heavy and
highway construction sites, construction
laborers clear and prepare highway work
zones and rights of way; install traffic
barricades, cones, and markers; and control
traffic passing near, in, and around work
zones. They also install sewer, water, and
storm drain pipes, and place concrete and
asphalt on roads.
At hazardous
waste removal sites, construction laborers
prepare the site and safely remove asbestos,
lead, radioactive waste, and other hazardous
materials. They operate, read, and maintain
air monitoring and other sampling devices in
confined and/or hazardous environments. They
also safely sample, identify, handle, pack,
and transport hazardous and/or radioactive
materials and clean and decontaminate
equipment, buildings, and enclosed
structures. Other highly specialized tasks
include operating laser guidance equipment
to place pipes, operating air, electric, and
pneumatic drills, and transporting and
setting explosives for tunnel, shaft, and
road construction.
Construction laborers operate a variety of
equipment including pavement breakers;
jackhammers; earth tampers; concrete,
mortar, and plaster mixers; electric and
hydraulic boring machines; torches; small
mechanical hoists; laser beam equipment; and
surveying and measuring equipment. They may
use computers and other high-tech input
devices to control robotic pipe cutters and
cleaners. To perform their jobs effectively,
construction laborers must be familiar with
the duties of other craft workers and with
the materials, tools, and machinery they
use. Construction laborers often work as
part of a team with other skilled
craft workers, jointly carrying out assigned
construction tasks. At other times,
construction laborers may work alone,
reading and interpreting instructions,
plans, and specifications with little or no
supervision.
While most
construction laborers tend to specialize in
a type of construction, such as highway or
tunnel construction, they are generalists
who perform many different tasks during all
stages of construction. However,
construction laborers who work in
underground construction (such as in
tunnels) or in demolition are more likely to
specialize in only those areas. |